Wireless Thermometer for Stove Pipe,Chimney,Outdoor Wood Boiler (1. Washer Sensor for Single Wall)

"This is a wireless thermometer with two display units. It can be used to remotely monitor the temperature of a stove pipe, a chimney in a multi-story home or outdoor wood boiler. For stove/chimney, the wireless feature provides you the ability to monitor the stove temperature remotely. You can place the sending unit near the stove in the basement and the monitoring unit upstairs. Both units have the temperature display and built-in alarm buzzer. The wireless unit eliminates the need for a long sensor cable that is difficult to install and less reliable. It also allows you to read the temperature either by the stove/wood boiler, or remotely. Three types of sensor options are available. One is a washer sensor for single wall pipe. It is to be mounted on the surface of the pipe or stove with a #10 screw. The other is a 4"" (100 mm) probe that can be used for double wall pipe. User need to drill a 1/8"" hole to insert the probe. The longer sensor cable allows the user to place the meter in one room and probe in the other room (or floor). The magnet probe can be attached to magnetic surfaces and walls. It can measure up to 750F (400C). Magnet may lose some of the holding force above that. The cable lengths for these three sensors are 6 ft (2m). Please contact us for further information. Included in the package: 1 x Remote monitor unit (AT210-B) 1 x Thermometer unit (AT210-A) 2 x AC to 12VDC adapter 1 x type K TC temp. sensor (select appropriate model in the sensor option) Max. sensor temp.: Washer sensor for single wall (TC-K-WS): Max. sensor temp.: 900��C (1650��F). Cable insulation: 900 ��F."